Loxone Valve Actuator Cable Tie 3D Print
Though would share a model I made recently that some might find helpful.
After a few years, I noticed some of the heads were popping off the holders, so this little top bracket is to be used with x2 cable ties to keep it in place.
https://www.printables.com/model/767...ator-cable-tie
After a few years, I noticed some of the heads were popping off the holders, so this little top bracket is to be used with x2 cable ties to keep it in place.
https://www.printables.com/model/767...ator-cable-tie
Kommentar