Open Garage Door while Alarm is Armed

[Gweavesy77]

Good morning everyone
I'm configuring my Loxone system. All was going well until the wife asks "if I get a parcel delivered during the day and I'm at work, can I open the garage door for the delivery guy then close it after hes delivered the parcel"

This would be fine but I have the "garage door closed" signal feeding into the alarm block so if she opens the garage door from her phone app remotely it will trigger the alarm.

Can I temporarily disable the "garage door closed" signal while she opens the door for the delivery guy then enable the signal again after delivery.

In my head this seems easy but I am really struggling to figure out how to do it in Config.

Many thanks
Josh

[Xenobiologist]

Just define a switch/button for your wife.
Actions are :
1) alarm off
2) open garage
3) wait 30 seconds
4) close garage
5) alarm on

Do you have a camera or the Loxone intercom to identity the postman?

[hme0354]

It would also bei possible to connect the garagedoor Sensor to a switch-off or on delay. So you maybe don't have to Switch of the Alarm.