Sonos4Loxone

[casacom]

Hallo die Runde,




vielleicht kann mir jemand weiterhelfen.

Ich habe 6 Sonos Zonen und mich begleitet folgendes Problem...

Wenn ich den Gong in nur einer Zone abspielen will funktioniert der Ton /plugins/sonos4lox/index.php?zone=kueche&action=sendmessage&messageid =1&volume=80

Wenn ich aber den Gong in allen Zonen abspiele funktionieren meistens nur 1 bis max. 2 Zonen?!?

Wo liegt hier der Fehler? Kann mir hier jemand weiterhelfen.




THX

[logol01]

mit welchem Komando schickst Du denn dien Gong ab?
schon mal mit /plugins/sonos4lox/index.php?zone=kueche&action=sendgroupmessage&memb er=kueche,buero&text=dies ist ein test&groupvolume=15
versucht?......

[casacom]

Funktioniert leider auch nicht! Keine Ahnung

[logol01]

habe es bei mir getestet....

so muss geht es..... ich hatte in meinem Post #2 einen Fehler.....

http://loxberry:password@192.xxx.xxx.xxx/plugins/sonos4lox/index.php?zone=esszimmer&playgong=yes&action=sendgroupmessage&member=flur%20eg&text=Da%20steht%20jemand%20an%20der%20T%C3%BCr%20&groupvolume=20

[gomma]

Hi all,

I have a strange problem happening in my installation. I have 4 zones up and running. I added 5th zone (address .23, name 'kuch'), scan for zones was successful:

[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:01.380 [COLOR=black][B]INFO:[/B] IP-adresses from Sonos devices has been successful detected by MULTICAST![/COLOR][/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:01.452 [COLOR=green][B]OK:[/B][/COLOR] Following Sonos IP-addresses has been detected: 192.168.1.24, 192.168.1.23, 192.168.1.21, 192.168.1.22, 192.168.1.30[/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:01.453 [COLOR=green][B]OK:[/B][/COLOR] Existing configuration file 'player.cfg' has been loaded successfully.[/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:01.453 [COLOR=green][B]OK:[/B][/COLOR] New Sonos Player: 'AMP' called: 'kuch' using IP: '192.168.1.23' and Rincon-ID: 'RINCON_347E5C0AB42601400' will be added to your Plugin.[/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:01.453 [COLOR=black][B]INFO:[/B] The initial setup has been completed.[/COLOR][/FONT][/COLOR][/SIZE]

However when I try to send any command nothing happens and following is in the logs:

[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:55.424 [COLOR=black][B]INFO:[/B] LoxBerry Version 2.0.1.3 ( is_raspberry.cfg )[/COLOR][/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:55.424 [COLOR=black][B]INFO:[/B] Sonos Version 3.9.4[/COLOR][/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:55.424 [COLOR=black][B]INFO:[/B] Loglevel: 7[/COLOR][/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:55.428 [COLOR=green][B]OK:[/B][/COLOR] called syntax: 192.168.1.37/plugins/sonos4lox/index.php?zone=kuch&action=radioplaylist&playlist= blanik&volume=15[/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#8080ff][FONT=monospace]19:05:55.430 Sonos config has been loaded[/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#8080ff][FONT=monospace]19:05:55.430 Player config has been loaded[/FONT][/COLOR][/SIZE]
[SIZE=13px][COLOR=#000000][FONT=monospace]19:05:55.430 [COLOR=red][B]WARNING:[/B][/COLOR] Requested ...zone=kuch seems to be Offline. Check your Power/Onlinestatus.[/FONT][/COLOR][/SIZE]

Same command works when used for different zones. I tried to unplug the Sonos with .23 address and plug it back again, no change.

Does anybody here have any advice what could be causing this? Thanks.