Tweet
Hi everyone
Whenever I try to format an SD Card with a new loxone firmware I run into
Formatting Error 23:
next try results in (time passed is different):
What I tried so far:
Now I kind of feel out of options - I am not able for the love of it to create a SD Card I can use. Is this so I am tricked to buy one? I am using my USB-C SD Card reader a lot because I deal with raspberries a lot and usually it flashes a SD Card in some seconds per Gigabyte. But this software takes ages (about 15 mins before I run into an error). I already tried preloading all the firmware packages.
What I do not understand: Sometimes the flashing process until a point is very quick (maybe 20 seconds for 10%) and sometimes it slows down a lot or stops at all for more than an hour (I also tried not touching it for 2h, but broke it off after that ...). Nevertheless, whenever I reach a certain point I am thrown out by Error 23. Usually at 50 - 60%, but it appears to have some randomness. I am probably 15-20 tries deep into this and wonder if I missed something?
Whenever I try to format an SD Card with a new loxone firmware I run into
Formatting Error 23:
next try results in (time passed is different):
What I tried so far:
- Bought a brand new SandIsk 32GB Ultra SD Card
- Tried using an old Sandisk 16GB Ultra SD Card
- Using a different PC (Both notebooks with win11, one a surface tab, the other one an Acer something)
- Using a different version of LoxonConfig (14.07 and 15.3 tried)
- Using a different SD Card reader via USB-C
- Using a different SD Card reader via USB 2.0
- Formatting the SD Card to FAT32 beforehand
- Running LoxoneConfig as Administrator
Now I kind of feel out of options - I am not able for the love of it to create a SD Card I can use. Is this so I am tricked to buy one? I am using my USB-C SD Card reader a lot because I deal with raspberries a lot and usually it flashes a SD Card in some seconds per Gigabyte. But this software takes ages (about 15 mins before I run into an error). I already tried preloading all the firmware packages.
What I do not understand: Sometimes the flashing process until a point is very quick (maybe 20 seconds for 10%) and sometimes it slows down a lot or stops at all for more than an hour (I also tried not touching it for 2h, but broke it off after that ...). Nevertheless, whenever I reach a certain point I am thrown out by Error 23. Usually at 50 - 60%, but it appears to have some randomness. I am probably 15-20 tries deep into this and wonder if I missed something?
Nach zig Versuchen auf mehreren notebooks parallel ist es nun auf einem endlich mal durchgelaufen und scheint zu funktionieren. Wird das Image aus dem Web gezogen?
Kommentar