Installed Loxberry in Raspberry PI 3 Model B+ microSD card compatibility

[ager]

Hi Christian Fenzl
I have found and solved it here as you wrote and it start all work OK.
After all working great I made backup of loxberry by win32DiskImager.

I start update loxberry and I have done:
04.03.2023 02:36: LoxBerry Update: A new version was installed successfully: v2.0.0
04.03.2023 02:23: LoxBerry Update: A new version was installed successfully: v1.4.4
06.03.2019 16:14: LoxBerry Update: A new version was installed successfully: v1.4.0.3
23.09.2018 23:53: LoxBerry Update: A new version was installed successfully: v1.2.4.5
11.09.2018 21:00: LoxBerry Update: A new version was installed successfully: v1.2.3.2

I am not able to do update from v2.0.0 to v2.2.2.2 and here is my log.

In version v2.0.0 I have tried widget backup but it doesnt work so widget backup work only from loxberry V2.2.2.2 please?

Any help please?
Many Many thanks!

[Christian Fenzl]

Prof.Mobilux Hast du eine Idee, wie wir da drüber kommen? Beim 2.0.2 FW-Update läuft er fehlerfrei durch, aber der /boot Check liefert dann trotzdem einen Fehler.
Hart auf 2.0.2 setzen?

[Prof.Mobilux]

This is the kernel update which fails. Maybe because of a too small boot partition. You can ignore the error (remove the failed script from general.json) and then go to LB 3.0.

[Christian Fenzl]

ager
So, via the file share or via Putty, edit these files in /opt/loxberry/config/system
general.json
general.cfg

In both, remove the Failedscript tag without destroying the file format.
If editing under Windows, use Notepad++, not the standard Notepad, to not destroy Linux line-endings.

The update then should bring you up to 2.2.2.2 (if nothing else fails).

Christian

[ager]

Thanks a lot for help Christian Fenzl and Prof.Mobilux

I did it but no help.
I connect to loxberry by FTP from windows program Winscp.
In general.cfg there is no line Failedscript so I didnt touch.

In general.json there is line Failedscript:
I couldnt edit file directly due to no permissions.
So I copied general.json file to PC, edited in PC by deleting this line.

before:

},
"Update": {
"Branch": null,
"Dryrun": null,
"Failedscript": null,
"Installtype": "notify",
"Interval": "1",
"Keepinstallfiles": null,
"Keepupdatefiles": null,
"Latestsha": "",
"Releasetype": "release"
},
"Watchdog": {

after:

},
"Update": {
"Branch": null,
"Dryrun": null,
"Installtype": "notify",
"Interval": "1",
"Keepinstallfiles": null,
"Keepupdatefiles": null,
"Latestsha": "",
"Releasetype": "release"
},
"Watchdog": {

Then I deleted original general.json file in loxberry by Winscp.
Then I copied edited general.json file to /opt/loxberry/config/system.
No reboot of loxberry.
I Have tried install loxberry to v2.2.2.2.
It didnt passed again errors.
I did reboot of loxberry.
I have checked general.json in /opt/loxberry/config/system and there was back Failedscript line again.
I repeat process as mentioned to delete this line.
Reboot loxberry.
I have checked general.json in /opt/loxberry/config/system and there was NO Failedscript line.
I Have tried install loxberry to v2.2.2.2.
It didnt passed again errors.

See log file in attachment.

Any help please?
Many thanks

[ager]

Guys can you please reply if there is any solution to avoid instalation from beggining or I will keep loxberry 1.4.0.3 version please?
Many thanks