Beta Thread

[TomekWaw]

Ok, I see now. But this is pretty hidden and clearly requires reading manual. Perhaps some additional icon somewhere there like a little cog or hamburger icon?

[hismastersvoice]

Yes, look to the dashboard and move mouse over Service or Zone you like to control and klick
https://music-server.net/help_v1/Nav...Dashboard.html

I have seen this issue with the font, put it on the list.

[TomekWaw]

Two general notes:
- I see no option to stop / start / restart services from UI like it was in 0.x.y, is there any?
- I would consider changing UI font. That one used now has problems displaying diacritic fonts. I see umlauts are OK, but most of Polish special chars are larger than regulars fonts. I see the same is in Czech version so I believe other version will also suffer from this problem

[hme0354]

thx

[hismastersvoice]

Ja ist so gewollt... von Loxone nicht von mir
Kannst du aber im Baustein abschalten...



Ich habe die Funktion an, wenn ich den Raum verlasse will ich zumindest alles aus.

[hme0354]

Bei mir funktioniert nun nach dem Update die Kommunikation zw. MS4L und dem Miniserver.

Mir ist bei den ersten Tests aufgefallen, dass ein Doppelklick auf T5/3 (mittlere Taste) nicht nur das Licht ausschaltet, sondern auch die Audiozone. Hab das in mehreren Räumen getestet und reproduziert. Ist das so gewollt?

[duncan]

there were no internal zones/players or sound cards after the update
i added the sound cards, the zones, rebooted and then was back up and running as before

[hismastersvoice]

the zone cards and internal zones disappeared, but squeezebox and all its settings were ok

Can you explain more detailed?
Normal with an update the should be untouched.

[duncan]

1st test:
installed over 0.74 with 2 x 8ch sound cards on debian 10.3

firstly a massive thankyou - the interface is so much more intuitive and simple

the zone cards and internal zones disappeared, but squeezebox and all its settings were ok
i created the new internal zones, rebooted and all 9 internal zones are back up playing my music and streaming

i changed the ip address using the new interface and it worked perfectly whereas previously i had to use telnet to set network settings

i rebooted a couple of times and all zones restarted correctly, something that 0.74 never did for me

next tests are to add external zones, test t5 and tts and finally the musicserver emulation in loxone

once again, many thanks

[hismastersvoice]

Wichtig Information
Unter Ubuntu 16.x funktioniert das MusicServerGateway nicht.
Hier gibt es Probleme mit den nodejs Pakten. Werde ich versuchen eine Lösung zu finden.

Important Information
The MusicServerGateway does not work under Ubuntu 16.x.
There are problems with the nodejs packages. I will try to find a solution.


Beta V1.x.x
Meldet hier bitte die gefunden Fehler und Verbesserungsvorschläge.

Beta V1.x.x
Please report the found errors and suggestions for improvement


Beta Update via Console #mstools update_ms_beta

[SIZE=14px][B]Changelog[/B][/SIZE]

#V1.0.10 Beta

WebUI
new -> Set Volume of Soundcard 0-100%
improve -> Dashboard - speedup access to update-page (extremely feelable on Raspi 3/4)
improve -> Update-Page - speedup access to update-page (extremely feelable on Raspi 3/4)
improve -> the correct network settings are displayed without restart
fix -> Network-Share was not mounted correct at some systems.

mstools
fix -> minor issues at update the MS4H


#V1.0.9 Beta
System
fix -> permission for Zones failed

#V1.0.8 Beta
KNX
fix -> Switches do not work with all models

Update
fix -> long load time for log-files

[B]MS4H Raspberry (Alpha)[/B]
new -> first version that support Raspberry 3/4

PowerManager
new -> CRelay Binary for Rasperry will be installed at installation process.

known issue
-> limitation to 1x 8-Channel Soundcard (work on solution)


#V1.0.7 Beta
MusicServer
change -> MusicServer4Lox is now renamed to MusicServer4Home
There are now may features also for usage without Loxone like KNX etc.
I will continue to focus on Loxone but also try to integrate other SmartHome-Systems

MusicServerGateway
new -> added Sleep-Timer Function

Support Data
improve -> more Hardware and Network Data / better overview / WAN-IP not longer included

Manual
new -> added Channel-Volume-Control
new -> added KNXd

FollowMe
fix -> Server_check on Debian went into an error

PowerManager
new -> Added CRelay to control USB-Relay-Cards
new -> Group-Control, controls the Power of up to 4 Zone-Groups e.g. Group-1 - Zone 1,2,4,6 / Group-2 Zone 3,5,7,8 etc..
So you are able to control up to 4 Amps with different Zones each Amp.
new -> KNX-Connect integrated
del -> Volume Reset (now you can set an value for each zone separately in Zone-Settings)

Zones
new -> Volume Reset with Value for each Zone (preparation for MSG-Function)
new -> KNX-Connect integrated

KNXd
new -> knxd implementation to receive and send messages to the KNX-Bus
new -> knx listener, to control MS4l via 2 switches like Labmasters T5 (see manual)
new -> knx callback, send Mode to GA for eg LED (stop/pause=0/play=1) / Titel/Artist/Volume in HEX for eg GlasTaster II

T5-Receiver
new -> Sleep can be switch on via "TS_SP <mac_of_zone> <v-time-sec>\n"

System
new -> /tmp Folder works now in a RamDrive to avoid to much write-actions in special if SD-Card is used

Update
new -> Beta is fully integrated into the update process. To activate "Login" "http://IP/update.php?beta=1 or ?beta=0"

Known issues
-> Special-Chapters are not shown correct by some KNX Display. This is not an issue of the MS4H! I will write an translator late

[B]#V1.0.6 Beta[/B]
Player internal
new -> Channel Volume Control for each channel. So you are able to set for every channel or Speaker the Volume separate.

Dashboard
new -> in Music-Zone dropdown I have included a test-function. After klick a audio-file is played (left channel / right channel / left and right channel)

[B]#V1.0.5 Beta[/B]

PowerManger
fix-> AmpAll works now better

Squeeze2Lox
new -> SayFav for T5 Next-Fav of MSG (same like from T5 Receiver)

Event
fix -> Event not always played at the first call

Update
fix -> MSG did not restart after update of LMS

Language
update -> all language files updated (thanks to the contributor)

Overall
fix -> minor fixes


[SIZE=14px][B]#V1.0.4 Beta[/B][/SIZE]
PowerManager
new -> UDP On/off Signal integration

T5-Receiver
fix -> T5 starts on boot even if Autostart set to 0

EventGenerator
fix -> Typo if all Zones selected
new -> Copy2Clipboard for EventURL

Event
fix -> Pause/Volume of Eventplayer will be set later, that avoid the second of silence before event will be play

Update-Script
fix -> EQ settings deleted after update


[SIZE=14px][B]#V1.0.3 Beta[/B][/SIZE]
WebUI
-> add @ to allowed characters
-> Typo fix
.> Network fix missing - in Hostname
-> Network allows no dots in domain name
-> Network mount add $ to allowed characters
-> External Zones, remove () in the automatic generated name to avoid issues with MSG
-> External Zone URL not working in PowerManager
-> EventGenerator, add missing Titles
-> EventGenaerator, fix wrong value at overlay_drop
-> PowerManger allows up to 3600 sec. for pause/stop power off

System
-> fixed del Eqs after update

PowerManger
-> optimized Power off after Event

Event
-> fixed Overlay stops Zone after Event if autoplay = 0 is set as standard
-> set internal Zone to 0 before power on to avoid glitches
-> code cleaning

MSG
-> fixed Image not allwas shown, add additional images like playlist/random to fav


[SIZE=14px][B]#V1.0.2 Beta[/B][/SIZE]
WebUI
-> Typo fixes
-> Form-Validation fixes
-> EventCreator minor fixes

MSG
-> Fav-Icon handling fixed

[SIZE=14px]PowerManager
-> URL on/off external Zones fixed

[B]#V1.0.1 Beta[/B][/SIZE]
WebUI
-> change font to optimize language support
-> add icons for better understanding in dashboard

MSG
-> better integration into boot process

Langauge
-> integrate dutch


[SIZE=14px][B]# V1.0.0 Beta[/B][/SIZE]

System
-> System is now prepared for multi-language, I have tested it with German and English. Should work theoretically with every language.
-> Change from 15 Band-EQ to 10-Band EQ to integrate the EQ-Setting into the MusicServerGateway (you have to set the EQ new after update)

WebUI
-> new WebUI with better usability and setup
-> faster setup because of dynamic sub-navigation e.g. all Player/Services reachable direct from the settings page etc.
-> multilingual
-> new Dashboard, for handling easy all Services an Player
-> better handling for sound cards, no separate Zone-Card needed anymore
-> support for special characters in passwords
-> Settings and Setup only show needed fields, all fields are checked before save
-> Event-Creator, help to create fast an correct events
-> Template-Creator, creates Output-Templates you can import into the Loxone Config

Event
-> multilingual
-> add Voice Responsive / supporting Czech language (user wish)
-> all possible languages for the TTS provider
-> optimization of event process

MusicServerGateway
-> connection to the Loxone APP, for now it is still alpha stadium, but a main functions work

under Development

-> integration of single zone event without blocking the event-process e.g. 3 alarm-clocks at the same time...
-> deeper MusicServerGateway integration like sync, library
-> Zone Tester, for test different parameters, to find errors
-> Log-Viewer for easy log-file reading
-> ...